Abracon’s Tiny but Mighty 2.0 products provide solutions for next-generation designs by increasing capabilities while reducing footprint. Abracon’s family of ultra-compact, Timing, and Frequency, RF & Antennas, and Inductors and Connectivity components are suitable for the IoT, Medical, and Consumer Electronic industry.

RF & Antennas

Our Tiny but Mighty 2.0 antennas are very small, approximately 2-3mm in length, and are suitable for applications where there is a space constraint. Our recently launched Saw Filters are very compact and measure only 1.1 x 0.9 mm and are suitable for applications where small components are required.

Our majority of antennas fall under either Wi-Fi/Bluetooth or GNSS protocol. Wi-fi/Bluetooth is the protocol of choice for a majority of consumer electronics such as smartwatches, smart vacuums, and fire alarms. In applications with geolocation or tracking, antennas covering GNSS/GPS frequencies are required.

Also, our UWB antennas transmit data across a wide range of frequencies and can be used to replace multiple narrow-band antennas while providing unparalleled design flexibility and seamless connectivity for uninterrupted operation.

Timing & Frequency

Abracon's ABS05 comes in at 1.6 x 1.0 mm, giving 33% more space-saving real estate than the previous ABS07. The ABS05 devices are available with ±20 ppm and ±25 ppm set-tolerance into an effective oscillator-loop load of 4.0 pF.

The ABM13W is one of the world’s smallest AT-cut quartz crystal. It's suited for space constraint applications and optimized for low plating load & ESR over industrial temps of -40C to +85C.

The ASAKMP is a Continuous Volt 32.768 kHz crystal oscillator with a ±10 ppm stability over temperature -40 to 85C and supply voltage options from 1.8V to 3.3V with Supply current < 27uA.

Inductors & Connectivity

Abracon Chip Inductors

The ASMPL low profile multilayer power inductor comes in a 1.6 x 0.8 x 0.5 and 2.0 x 1.25 x 0.5 size.

The AIMC multilayer ceramic chip inductor comes in a 0.6 x 0.3 x 0.3 and 1.0 x 0.5 x 0.5 size.

These inductors feature a high current carrying, a compact footprint, and a wide temperature operating range and are built for Wireless Modules, Internet of Things (IoT), Bluetooth, Commercial & Industrial Applications.

Abracon Power Inductors

The ASPI high power density molded inductor comes in a 6.0 x 6.0 x 4.5 and 6.0 x 5.7 x 4.8 size.

The AMSLA stacked core molded inductor comes in a 7.0 x 7.0 x 5.0 size.

These inductors feature a shielded construction, soft saturation, high saturation current, high efficiency, low DCR and high-power density and are built for DC/DC Switching converters, Power Supplies, Desktop, Server, Lighting, Robotics, Wearables, and Portable LTE/WiFi.

石英晶體	產品類型	描述
ASAKMP	Miniature 32kHz XO	1.6 x 1.2mm footprint & 0.6mm profile
ABM13W	Miniature Crystal	1.2 x 1.0mm footprint & 0.33mm profile
ABS05	Miniature 32kHz XO	1.2 x 1.0mm footprint & 0.35mm profile
AMPM	Power Optimized MEMs	1.6 x 1.2mm footprint & 0.84mm profile
ACAR0301-SG3	GPS/GLONASS/BEIDOU Chip Antenna	3.05 x 1.6mm footprint & 0.55mm profile
ACAR0301-SW2	Dual Band WiFi Chip Antenna	3.05 x 1.6mm footprint & 0.55mm profile
ACAG0201-2450-T	2.4 GHz Chip Antenna	2.0 x 1.25mm footprint & 0.6mm profile
ACAG0301-5500-T	5.5 GHz Chip Antenna	3.2 x 1.6mm footprint & 1.2mm profile
ASMPL	Chip Inductor	1.6 x 0.8mm footprint & 0.5mm profile
ASMPM	Chip Inductor	2.0 x 1.6mm footprint & 1.0mm profile
ABSTS5A245HM03BM	SAW Filter WiFi	1.1 x 0.9mm footprint and 0.55mm profile
ABSTS5A2-2HMM01MM	SAW Filter GPS	1.1 x 0.9mm footprint and 0.55mm profile
ACAR3705-SB	LPWA/ Sub-GHz Cellular Chip Antenna	37.0 x 5.0mm footprint and 5.0mm profile
ACAR3005-S824	2G/3G/GSM Chip Antenna	30.0 x 5.0mm footprint and 5.0mm profile
AMELA2012S	Molded Inductor	2.5mm x 2.0mm footprint and 1.2mm profile

正在載入評論數據...

此文關鍵字：超小型晶振

成人无码免费一区二区中文I精品人妻18I日韩乱色精品一区二区IA片女女女女女女BBBBI另类综合在线I在线国产中文字幕I亚洲人人爱I亚洲码国产日韩欧美高潮在线播放I午夜色撩人

技術支持

帝國博客

微小但強大的2.0面向下一代消費者的產品

相關資訊

帝國科技

服務熱線

姓名：
郵箱：
正文：